WARP PROPULSION SYSTEMS
THE WARP CORE IS LOCATED IN THE AFT ENGINEERING SECTION AND SPANS ALL FOUR DECKS VERTICALLY. THE MATTER - ANTIMATTER REACTION ASSEMBLY (M/ARA) IS EMBEDDED WITHIN DECK 3, WITH THE SURROUNDING SYSTEMS BALCONY ABOVE, ON DECK 2. THE CORE IS CONSTRUCTED FROM A CENTRAL TRANSLUCENT ALUMINUM AND DURANIUM REACTOR WITH DILITHIUM ARTICULATION FRAME, FOUR-LOBED MAGNETIC CONSTRICTION SEGMENT COLUMNS, AND MATTER AND ANTIMATTER INJECTORS. PLASMA TRANSFER CONDUITS EXIT THE CORE ON DECK 3 AND EXTEND LATERALLY TO THE NACELLES AND THE WARP PLASMA INJECTORS. THE NACELLES INCORPORATE AN IN-LINE IMPULSE SYSTEM, WHICH ACCEPTS MATTER INTAKE AND HEATING WITHIN THE NACELLES AND EXHAUSTS THE HEATED GASES THROUGH A SPACE-TIME DRIVER ASSEMBLY IN THE NACELLE AFT CAP. ANTIDEUTERIUM IS STORED IN A SERIES OF STANDARD STARFLEET ANTIMATTER PODS ON DECK 3, FORWARD OF THE WARP CORE. ALL REGULATION WARP ENGINE CONTROLS AND PROCEDURES APPLY TO ALL DEFIANTCLASS STARSHIPS.
IMPULSE PROPULSION SYSTEMS
THE PRIMARY IMPULSE SYSTEM
CONSISTS OF THREE PAIRS OF REDUNDANT FUSION REACTORS,
SPACE-TIME DRIVER COILS, AND VECTORED EXHAUST DIRECTORS.
THE EXHAUST PRODUCTS MAY BE HELD TEMPORARILY IN
THE IMPULSE NOZZLE COWLING, TO MINIMIZE THE SHIP'S ION OR EM SIGNATURE,
OR THEY CAN BE VENTED THROUGH ELECTRO POROUS PLATES ALONG THE TRAILING
SURFACE OF THE COWLING.
THE RCS THRUSTERS ARE ADAPTED FROM THRUSTER PACKAGES FROM
GALAXY AND AMBASSADOR CLASS VESSELS. A TOTAL OF
EIGHT THRUSTER GROUPS ARE INSTALLED; TWO ARE PLACED IN
THE FORWARD HULL , FOUR IN THE MID-HULL, AND TWO IN THE AFT COWLING.
DEUTERIUM IS SUPPLIED BY THE PRIMARY TANKAGE ON DECK 2 AND IMMEDIATE-USE
TANKS WITHIN THE THRUSTER PACKAGES.
VELOCITY
MAXIMUM IMPULSE SPEED : 0.92 C (1.0 IS THE SPEED OF LIGHT, OR WARP 1)
MAXIMUM WARP SPEED : 9.982 FOR 12 HOURS
THE ENGINES HAVE A TENDENCY TO OUTRUN THE INERTIAL DAMPERS DURING EXTREME MANEUVERS, MAKING THE DEFIANT CLASS THE ONLY STARSHIP CLASS IN THE FEDERATION THAT CAN "PULL-G'S." IT HAS A TURN RATE OF APPROXIMATELY 180 DEGREES PER SECOND.
THIS WEB SITE WAS CREATED AND IS MAINTAINED BY JOHNNY R. CALL. ANY QUESTIONS OR COMMENTS SHOULD BE DIRECTED TO HIM.